Audio Technica 901 Wireless Headworn Microphone System with Pro 35cW Mic

Audio TechnicaSKU: ATW-901A/H-PRO35CW

Price:
Sale price$176.98

Description

  • Audio Technica 901 Wireless Headworn Microphone System: ATW-901/H
  • Audio Technica Cardioid Condenser Clip-on Instrument Microphone: PRO35CW

The Audio-Technica system 9 is an agile wireless system with a four-channel frequency designed to give a solid presentation with simple setup and clear and natural sound quality. Presenting an elegant, stackable, and contemporary style, System 9 is available in manual mode, with headband, guitar, lavalier, and body-pack configurations. The system offers four user-compatible VHF channels that can be changed (169.505, 170.245, 171.045, and 171.905 MHz).


Each System 9 configuration includes the ATW-R900 receiver and a body-pack transmitter or a handheld microphone / transmitter. The ATW-R900 is a single-channel diversity receiver, with advanced dipole antenna design for an extended operating range, which improves the performance it provides is a terrestrial factor, in addition to the usual signal element. The ATW-R900 also offers volume control along with the AF Peak, RF and Power indicator lights.

  • Easy to operate and clear and natural sound quality
  • 4 frequently coordinated selectable VHF channels
  • Balanced XLR and 1/4 "unbalanced output connectors allow use with a variety of audio equipment
  • Reliable presentations and durable construction
  • Dipole antenna system for extended operating range

CHARACTERISTICS

OVERALL SYSTEM SPECIFICATIONS

  • Operating Frequencies: VHF highband, 169 MHz to 172 MHz 
  • Modulation Mode: FM 
  • Maximum Deviation: +/-10 kHz 
  • Dynamic Range: >/=90 dB (A-weighted), typical 
  • Total Harmonic Distortion: <1% (at 1 kHz, +/-10 kHz deviation) 
  • Operating Range: 200' (60 m) typical 
  • Open range environment with no interfering signals 
  • Operating Temperature Range: 40° F (4° C) to 110° F (43° C) 
  • Battery performance may be reduced at very low temperatures 
  • Frequency Response: 80 Hz to 13 kHz 
  • Maximum Simultaneous Use (Recommended): 200' minimum 

RECEIVER SPECIFICATIONS 

  • Receiving System: Non-diversity, single-channel, dual antenna system 
  • Image Rejection: 50 dB minimum 
  • RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination) 
  • Audio Output: Nominal Output Level  
  • XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)  
  • 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load) 
  • Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply 
  • Operating Temperature Range: 40° F (4° C) to 110° F (43° C) 
  • Dimensions: 7.48" (190.0 mm) W x 1.82" (46.2 mm) H x 5.06" (128.5 mm) D 
  • Net Weight: 12.0 oz (337 grams) 
  • Accessory Included: Power supply 

BODY-PACK TRANSMITTER SPECIFICATIONS 

  • RF Power Output: 10 mW 
  • Spurious Emissions: Following federal and national regulations 
  • Input Connections: Four-pin Locking Connector  
  • Pin 1: GND  
  • Pin 2: INST INPUT  
  • Pin 3: MIC INPUT  
  • Pin 4: DC BIAS +9V 
  • Batteries: Two 1.5V AA  
  • not included 
  • Battery Life: 8 hours (alkaline)  
  • Depending on battery type and use pattern 
  • Dimensions: 2.76" (70.2 mm) W x 4.08" (103.7 mm) H x 0.98" (24.9 mm) D 
  • Net Weight: 2.8 oz (80.0 grams)  
  • without batteries


HANDHELD TRANSMITTER SPECIFICATIONS 

  • RF Power Output: 10 mW 
  • Spurious Emissions: Following federal and national regulations 
  • Batteries: Two 1.5V AA  
  • not included 
  • Battery Life: 8 hours (alkaline)  
  • Depending on battery type and use pattern 
  • Dimensions: 9.91" (251.8 mm) long,  
  • 2.11" (53.5 mm) diameter 
  • Net Weight: 9.2 oz (260 grams)  
  • without batteries 
  • Accessory Included: AT8456a Quiet-Flex™ stand clamp

Designed for sax, toms, brass and percussion, the PRO35cW excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone's cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source. 

  • UniMount® clip permits accurate positioning, provides shock resistance and protects element
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Extended frequency response captures subtle nuances of the performance
  • Terminated with locking 4-pin connector for A-T UniPak® body-pack wireless transmitters
  • 55" (1.4 m) cable
  • Includes AT8418 instrument mount for brass, reeds, drums, etc
CHARACTERISTICS
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Patter: Cardioid
  • Cable: 5.5' (1.4 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with HRS4-type connector
  • Accessories Included:  AT8418 UniMount® microphone instrument mount; soft protective pouch

    You may also like