Galaxy PSE Economical 16 Ch L Rackable Wireless Mic System

Galaxy AudioSKU: PSER/HH52

Price:
Sale price$108

Description

The PSE system is a UHF diversity receiver with 16 selectable channels. The multi channel microphone receiver features a volume control, channel display, Diversity Antennas and IR Sync. The PSE has an XLR 1/4" output and squelch adjustment. The PSE is available with a handheld, body pack with headset, lav, or instrument cable. 


The PSER can be used and will sync with either the HH52 or MBP52 transmitters. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2 AA batteries. The MBP52 body pack transmitter has a 0/-10/Mic selector switch.

PSER Receiver

  • Output Volume Control
  • IR Sync Receiver to Transmitter
  • AF Level Indicator
  • Active Antenna Indicator
  • Squelch Adjustment
  • XLR / 1/4" Outputs
  • Detachable BNC Antennas
  • Metal Chassis

HH52 Transmitter

  • Dynamic Microphone Element
  • On/Off Switch
  • IR Sync Transmitter to Receiver
  • High/Low RF Switch
  • 10 mW / 5 mW
  • Metal Chassis
  • Operates on 2 AA Batteries (up to 8 hours Alkaline)
  • Dimensions: 9.8" x 2.1" (250 x 53 mm) (L x Dia.)
  • Weight: 9.5 oz. (270 g)

MBP52 Transmitter

  • Low Battery Indicator
  • 3 Position Switch
  • IR Sync Transmitter to Receiver
  • Mic/0/-10dB
  • Operates on 2 AA Batteries (up to 8 hours Alkaline)
  • Dimensions: 3.3" x 2.6" x 1" (85 x 65 x 24 mm) (HxWxD)
  • Weight: 2.8 oz (80 g)
PSE SYSTEM SPECS
Available Frequencies 16
Frequency Ranges CODE D 584~607MHz
CODE N 518~542MHz
Band UHF
Operating Range Under Typical Conditions 300' (92 m), actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response (+/-3 dB) 60 Hz ~ 16 kHz
Total Harmonic Distortion (+/-30 kHz deviation 1 kHz tone): <1%
Dynamic Range >90 dB A-weighted
Operating Temperature Range 14° F to 122° F (-10° C to 50° C), battery characteristics may limit this range

PSER RECEIVER
Audio Output Level (+/-30 kHz deviation, 1 kHz tone) XLR Connector (into 600 Ohms load) -12 dBV
1/4" Connector (into 3 k Ohms load) -18 dBV
Output Connections 1 Male XLR Balanced
1/4" Balanced
Output Impedance XLR connector 200 Ohms
1/4" connector 1 k Ohms
XLR Output Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio +
Pin 3: No Audio -
Sensitivity -93 dBm for 30 dB
Image Rejection >90 dB
Casing Metal Chassis EIA STANDARD 1 U
Dimensions 1.7" x 8.3" x 6.3" (44 x 212 x 160 mm)
Weight 31 oz (880 g)
Power Requirements 12-18 V DC at 300 mA, supplied by external power supply

HH52 HANDHELD TRANSMITTER
Max Audio Input Level 0 dBV
Gain Adjust Trim Pot
RF Output 10 mW, 5 mW
Frequency Response 70 Hz ~ 15 kHz
Dimensions 9.8" x 2.1" (250 x 53 mm) (LxDia)
Weight 9.5 oz (270 g) (without batteries)
Power Requirements 2 "AA" size alkaline or rechargeable batteries
Battery Life About 8 hours (alkaline)

MBP52 BODY PACK TRANSMITTER
Max Audio Input Level 0 dBV to +10 dBV
Gain Adjust Mic / 0 dB / -10 dB
RF Output 10 mW
Input Impedance 5 k Ohms
Dimensions 3.3" x 2.6" x 1" (85 x 65 x 24 mm) (HxWxD)
Weight 3.0 oz (85 g)
Power Requirements 2 "AA" size alkaline or rechargeable batteries
Battery Life About 8 hours (alkaline)

You may also like